Sale!

Fiberlock IAQ 6000 Mold-Resistant Coating White 5gal Fiberlock

Name: We're proud of treating each client as if they were a member of the family. Helping customers find the Fiberlock IAQ 6000 Mold-Resistant Coating White 5gal Fiberlock
SKU: us_5861288706201
Price: 204 USD
Availability: InStock

Original price was: $ 679.Current price is: $ 204.

Base UOM

Clear

SKU: us_5861288706201 Category: DOM CHEM RESTORATION Tags: Fiberlock, Mould Remediation, Water Damage Chemicals

IAQ 6000 is a white, tintable mold-resistant coating*, that contains a fungistatic agent to resist mold growth on the dry coating surface.

IAQ 6000 is a durable, flexible, and permeable 100% acrylic water-based coating. IAQ 6000 is recommended for use on wood, plaster, wallboard, sheetrock, concrete, masonry block, primed metal, and galvanized metal.

*Resistant to mold growth on the dry coating surface only

Features

Tested by independent laboratories for mold resistance: ASTMG-21 and ASTM D-3273
Mold resistant*
Tintable formula
100% acrylic

*Resistant to mold growth on the dry coating surface only

How to Use

SURFACE PREPARATION

Surfaces to be coated must be free of dust, mildew, mold, dirt, grease, loose paint, oil, glue size, calcimine, wax, soap, and other surface contamination. Clean mold-stained surfaces with Advanced Peroxide Cleaner, or use an EPA-registered antimicrobial disinfectant cleaner such as IAQ 2000, IAQ 2500, ShockWave, or ShockWave RTU. Patch irregularities with vinyl patching paste or an appropriate patching compound. IAQ 6000 is self-priming over bare sheetrock, composition board, ceiling tile, and concrete.

WALLBOARD, SHEETROCK, GYPSUM BOARD

Joint cement should be sanded smooth, but avoid abrading the paper.

FERROUS METAL

Clean, then prime with IAQ 4000 rust-inhibiting direct-to-metal primer.

WOOD

Seal knots and stains with IAQ 5000 stain-blocking primer.

MASONRY BLOCK

Apply one coat of IAQ 3000 block filler if a denser surface is desired.

APPLICATION TOOLS

Apply IAQ 6000 with a brush, roller, or airless spray equipment.

Brush: Synthetic, nylon, or polyester bristle
Roller: Synthetic fiber 3/8” nap or longer
Spray Settings Pressure: 2000-3000 P.S.I. Tips: .019 to .021 tips

TINTING

IAQ 6000 may be tinted to an off-white or pastel-based color. Add up to 2 oz. of universal colorant per gallon. Start with 50% of the tinting formula and adjust as necessary.

PRODUCT APPLICATION

IAQ 6000 is supplied ready to use but can be thinned sparingly with water (up to 1/2 pint water per gallon) for proper application consistency if necessary. Apply IAQ 6000 generously and uniformly by brush, roller, or airless spray. Apply one coat of IAQ 6000 and ensure that the finished surface is properly sealed. To ensure that the finished surface is properly sealed, two coats may be required on some porous surfaces.

COVERAGE

Smooth Surfaces- 250-400 sq. ft. per gallon (25-40m² per 4ltrs)
Porous Surfaces- 150-300 sq. ft. per gallon (15-30m² per 4ltrs)

DRYING TIME

@ 70°F 50% R.H
To Touch – 1 Hour
Recoat – 4 Hours

CLEANUP

Clean tools and drippings with warm soapy water before Fiberlock IAQ 6000 dries. Dispose of all waste according to all existing local, state, and federal regulations.

PRECAUTIONS

Store in a dry place at temperatures between 40°F (4.5°C) and 90°F. (32°C). Stir thoroughly. Do not mix with any other coatings, solvents, or colors in oil. The IAQ 6000 coating is resistant to mold only on the surface of the coating. No mold resistance claim is made other than to the coating itself. The use of this product does not protect users or others against food-borne or disease-causing bacteria, viruses, germs, or other disease-causing organisms. Do not apply when air or surface temperature is below 50°F, when drying conditions are poor, or when surfaces are above a 15% moisture level content. Use adequate ventilation during application. When applying with a sprayer, wear a NIOSH-approved respirator with any R, P, N, or HE filter. For interior use only.

Safety & Technical Data Sheets

PDS
SDS
Clean. Kill. Coat. for Mold & Water Damage

Base UOM	18.9LTR, 18.9LTR 2+, 18.9LTR 6+, 18.9LTR 12+, 18.9LTR 36+

Fast shipping and professional packing

Due to our long-term partnership in a long-standing partnership with UPS, FedEx, DHL and many other world-class carriers, we can offer a variety of shipping options. Our warehouse staff is expertly trained and will wrap your products according to our precise and exact specifications. The goods you send us are checked thoroughly and properly secured before shipping. We ship to thousands of customers each day across various countries. The fact that we're committed to becoming the biggest online retailer in the World is obvious. There are distribution centers and warehouses across Europe and the USA.

It is important to note that orders with more than one item are processed according to the item.

Before shipping Our team will conduct an extensive inspection of the products you have ordered. The majority of orders are shipped within 48 hours. The time to deliver varies from 3-7 days.

Returns

We are not able to manage the stock in our warehouse or factory. Stock levels can fluctuate at any time. It's possible that your order will run out of stocks after you place the order.

Our policy lasts for a period of 30 days. If you have passed 30 days by since your purchase, unfortunately we can't offer you a return or exchange.

In order for your item to be considered eligible for return the item must not be opened and in the same condition as when you received it in. You must have the item in the original packaging.