Hydro-Force Viper Venom Powder with Citrus 2.7kg Bridgepoint

Viper Venom Powder with Citrus is an economical, powdered heavy-duty tile & grout pre-spray designed to tackle the nastiest soils.

This high pH, solvent-fortified pre-spray dissolves greasy restaurant oils and leaves a pleasant citrus smell.

Viper Venom powder with citrus is a heavy-duty tile & grout pre-spray designed for use with all types of pump or electric sprayers. Best results are obtained when mixed with hot water.

• A HOT, ultra-concentrated high alkaline pre-spray
• Economical as it makes up to 25 ready-to-use gallons per jar for restoration cleaning and about 100 ready-to-use gallons for maintenance tile & grout cleaning.
• Starts to work on contact and uses its blend of solvents, surfactants, and alkaline builders to dissolve grease and oil in minutes.
• Dissolves easily and quickly in around 30 seconds.
• Less foamy than typical tile & grout restoration pre-sprays.
• A pleasant blend of citrus fragrances (orange, lemon, and lime) combined with their natural cleaning strength.
• Versatile and effective enough to be used on most hard surfaces at a 1 to 128 dilution which makes about 100 ready-to-use gallons of a General Purpose Cleaner.

DIRECTIONS:

Grout and Tile restoration:

• Dilute 120g to 180g (2 to 3 scoops) Viper Venom Powder with 4ltrs hot water.
• Low pressure spray or mop onto grout and tile and allow to dwell for 5 minutes.
• Do not allow to dry before cleaning/extracting.

Grout and tile maintenance:

• Dilute 30g of Viper Venom Powder with 4ltrs hot water.

General cleaning and walls:

• Dilute 15g of Viper Venom Powder with 4ltrs hot water.

 Woodwork, porcelain, and chrome:

• Dilute 30g of Viper Venom Powder with 4ltrs hot water.

Dilution Ratios: 5-45g/ltr     RTU pH: 12-13      Contains: 2.72kg 

Information Sheets
Safety Data Sheet
Specification Sheet
Product Label
Tile & Grout Cleaning Brochure