Sale!

Fiberlock IAQ 6000HD Heavy-Duty Mould Resistant* Coating (White) 5gal Fiberlock

Name: Shop with Confidence: Fiberlock IAQ 6000HD Heavy-Duty Mould Resistant* Coating (White) 5gal Fiberlock
SKU: us_5861289427097
Price: 255 USD
Availability: InStock

Original price was: $ 1.018.Current price is: $ 255.

Base UOM

Clear

SKU: us_5861289427097 Category: DOM CHEM RESTORATION Tags: Fiberlock, Mould Remediation, Water Damage Chemicals

Fiberlock IAQ 6000HD… HEAVY-DUTY MOLD-RESISTANT* COATING – WHITE

Ideal for use during new building construction, IAQ 6000HD is designed with durability and flexibility to resist mold growth on the dry coating surface.

Use it on non-porous and semi-porous building materials, including gypsum wallboard, oriented-strand board (OSB), wood framing timbers, plywood, masonry block, and many other structural surfaces where a flexible, high-build, mold-resistant coating is necessary.

*Resists mold on the dry coating surface only

Features

White, tintable, high-build coating
100% acrylic, water-based flat coating
Ideal for porous material
Class A fire-rated
The high-build formula for one-coat coverage

How to Use

SURFACE PREPARATION

Carefully clean up with a wet mop or HEPA vacuum. Surfaces to be coated must be free of dust, mildew, mold, dirt, grease, loose paint, oil, glue size, calcimine, wax, soap, and other surface contamination. Clean mold-stained surfaces with Advanced Peroxide Cleaner, or use an EPA-registered antimicrobial disinfectant cleaner such as IAQ 2000, IAQ 2500, ShockWave, or ShockWave RTU. Patch irregularities with vinyl patching paste or an appropriate patching compound. IAQ 6000HD is self-priming over bare sheetrock, composition board, ceiling tile, and concrete.

WALLBOARD, SHEETROCK, GYPSUM BOARD

Joint cement should be sanded smooth, but avoid abrading the paper.

FERROUS METAL

Clean, then prime with IAQ 4000 rust-inhibiting direct-to-metal primer.

WOOD

Seal knots and stains with IAQ 5000 stain-blocking primer.

MASONRY BLOCK

Apply one coat of IAQ 3000 block filler if a denser surface is desired.

APPLICATION TOOLS

Apply IAQ 6000HD with a brush, roller, or airless spray equipment.

Brush: Synthetic, nylon, or polyester bristle
Roller: Synthetic fiber 3/8” nap or longer
Spray: .021 to .025 tip @ 2000-2800 P.S.I.

TINTING

IAQ 6000HD may be tinted to any off-white or pastel-based color. Add up to 2 oz. of universal colorant per gallon. Start with 50% of the tinting formula and adjust as necessary.

PRODUCT APPLICATION

IAQ 6000HD is supplied ready to use but can be thinned sparingly with water (up to ½ pint of water per gallon) for proper application consistency if necessary. Apply IAQ 6000HD generously and uniformly by brush or airless spray. Ensure that the finished surface is properly sealed. To ensure that the finished surface is properly sealed, two coats may be required on some highly porous surfaces.

COVERAGE

Smooth Surfaces: 250-400 ft²/gal.
Porous Surfaces: 100-300 ft²/gal.

DRYING TIME

@ 70°F 50% R.H
To Touch: 1-2 hours
Recoat: 8-16 hours

CLEANUP

Clean tools and drippings with warm soapy water before IAQ 6000HD dries. Dispose of waste according to all existing local, state, and federal regulations.

PRECAUTIONS

Store in a dry place at temperatures between 40°F (4.5°C) and 90°F (32°C). Stir thoroughly. Do not mix with any other coatings, solvents, or colours in oil. IAQ 6000HD is resistant to the deteriorating action of mold and mildew. No claim is made for the preservative action other than to the coating film. The use of this product does not protect users or others against food-borne or disease-causing bacteria, viruses, germs, or other disease-causing organisms. Do not apply when air or surface temperature is below 50°F, when drying conditions are poor or when surfaces are above an 11% moisture level content. Use adequate ventilation during application. For interior use only.

Safety & Technical Data Sheets

Base UOM	18.9LTR, 18.9LTR 2+, 18.9LTR 6+, 18.9LTR 12+, 18.9LTR 36+

Fast Shipping and Professional Packaging

We provide a variety of shipping options owing to our long-running partnerships with UPS, FedEx and DHL. Our warehouse staff is highly educated to pack your items exactly as per the specifications that we supply. Before shipping, your goods will be thoroughly inspected and secured. We ship to thousands of customers every day across multiple countries. This shows that we're committed to being the largest retailer online in the world. Both Europe as well as the USA have distribution and warehouse centres.

Note: Orders containing multiple items will have a distinct processing time for each item.

We will thoroughly inspect all products before they are shipped. The majority of orders will be sent within 48 hours. Expected delivery time is between 3 and 7 days.

Returns

The inventory is constantly changing and we do not fully manage it because of the fact that many parties are involved, including our warehouse and factory. The stock levels may fluctuate at any given time. Please be aware that it is possible for your order to be out of stock after you have placed the order.

Our policy is valid for 30 days. However, if 30 days have passed since you purchased your item, we will not be able to give you a refund or exchange.

You can only return an item in the event that it is not used and is in the same state as when you received it. The item should be in the original packaging.